Managing Programs; Using Previous Settings - Samsung CLX-9252 9352 Series User Manual

Managing Programs

1. Press Fax from the display screen.
2. Press Programs > List.
3. Press the appropriate option.
• Select All: Selects all programs.
• Detail: Displays detailed information of selected program.
• Edit: Changes a name of selected program.
• Delete: Removes the selected programs.
4. Press Cancle for return to the Basic tab.

Using previous settings

1. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 35).
2. Press Fax from the display screen.
3. When the cursor is blinking in the input line, enter the fax number using
the numeric keypad on the control panel, or use Address Book from the
display screen if you have stored frequently used fax numbers.
4. Press Programs.
5. Press a previous setting you want to use.
For example, if you want to use the settings from the last job, press
Previous1.
6. Press OK.
7. Press Yes when the confirmation window appears.
The machine is now set to fax according to the setting you selected.
8. Press Start on the control panel. The machine starts to scan and send a
fax to destinations.
• When you want to cancel a fax job, press Stop on the control
panel before the machine start transmission. Or press the Job
Status button on the control panel, and select the job you want to
delete, press Delete (see "Job Status button" on page 30).
• If an original is placed on the scanner glass, the machine shows
the window asking if you want to place another page. Load another
original and press Yes. When you finish, press No on this window.
• While the machine is sending a fax, you cannot send an email at
the same time.
Faxing (optional)_ 126