Download  Print this page

Honeywell PCR191W User Manual

Atomic projection clock.
Hide thumbs
   

Advertisement

PCR191W – Atomic Projection Clock
HOW DO I SET THE TIME ZONE ON MY PCR191W?
Select the US Time Zone by pressing and holding the UP (+) button for 3 seconds.
Keep holding the UP (+) button until the desired US Time Zone (Pacific, Mountain, Central or
Eastern) is highlighted on the display's US map, located to the right of the time display and above
the seconds.
Release the UP (+) button. The Time Zone is set.
HOW MANY ALARMS CAN BE SET ON MY PCR191W?
The PCR191W has dual alarm with programmable snooze interval. If any of the alarms is
activated, it will sound at the set time and the alarm icon will flash Mondays through Fridays.
HOW TO SET THE TIME ALARM?
Press the MODE button to select the desired alarm to be set – ALARM 1 or ALARM 2. The default
alarm time for ALARM 1 is set to "6:00AM".
• Press and hold
button for three seconds. The hour digit will begin to flash.
• Select the desired hour using DOWN (-) or UP (+) buttons.
• Press
button to confirm selected hour and move to minute's adjustment. The minute digits
will flash.
• Enter the minutes using DOWN (-) or UP (+) buttons.
• Press the
button confirming the ALARM 1 time is set.
• Use the same procedure for setting the time for ALARM 2
HOW TO DISABLE THE TIME ALARM?
Press
or
selecting the ALARM 1 or ALARM 2 – an appropriate bell icon will
disappear from the display showing that alarm is disabled.
HOW DO I SET THE LANGUAGE FOR THE DAY OF THE WEEK?
Press and hold DOWN (-) button until the language abbreviation will be displayed – EN (for
English), SP (for Spanish) or FR (for French). Once the desired language abbreviation is displayed,
release the DOWN (-) button, and the day of the week will be displayed in selected language.
HOW DO I SET 12 OR 24 HOUR TIME FORMAT?
To set 12 hour time format, press UP (+) button once, and "AM" or "PM" will appear to the left of
the time display.

Advertisement

   Also See for Honeywell PCR191W

   Related Manuals for Honeywell PCR191W

   Summary of Contents for Honeywell PCR191W

  • Page 1: 12/24 Hour Time Format

    HOW MANY ALARMS CAN BE SET ON MY PCR191W? The PCR191W has dual alarm with programmable snooze interval. If any of the alarms is activated, it will sound at the set time and the alarm icon will flash Mondays through Fridays.
  • Page 2: Change A Temperature Unit

    To set 24 hour time format, press UP arrow button once until “AM” or “PM” abbreviation will disappear from the time display. HOW DO I CHANGE A TEMPERATURE UNIT IN MY PCR191W? The temperature measurement unit (Cº or Fº) can be changed only through entering clock setting procedure: 1.
  • Page 3: Enable Atomic Time Signal Reception

    The radio reception icon will start flashing showing that the unit is searching for the atomic time signal. MY PCR191W DID NOT RECEIVE ATOMIC TIME SIGNAL DURING INITIAL SETUP. HOW CAN THIS BE FIXED? Please consider the following when atomic time is not set during the initial setup: •...
  • Page 4: On Projection Timing

    Your product is able to project the time and indoor or outdoor temperature image for a short period of time (5-6 seconds), or continuously (when the AC/DC adapter is connected). HOW DO I SET MY PCR191W TO THE MODE PROJECTING TIME OR INDOOR TEMPERATURE?

Comments to this Manuals

Symbols: 0
Latest comments: