Problem Solving Guide - Miele KM 6350 Operating And Installation Instructions

Problem solving guide

With the help of the following notes, minor faults in the performance of the
appliance, some of which may result from incorrect operation can be put right
without contacting the Service Department.
,
Installation work and repairs to electrical appliances should only be carried
out by a suitably qualified person in strict accordance with current local and
national safety regulation. Repairs and other work by unqualified persons could
be dangerous. The manufacturer cannot be held liable for unauthorised work.
Problem
The hob or cooking
zones cannot be
switched on.
50
Possible cause
The mains fuse has tripped. Reset the trip switch in the
There may be a technical
fault.
Remedy
mains fuse box (minimum
fuse rating - see data
plate).
Disconnect the appliance
from the electricity supply
for approx. 1 minute.
– switch off at the wall
socket and withdraw the
plug, or switch off at the
isolator, or
– disconnect the mains
fuse.
Reset the trip switch in the
mains fuse box, and switch
the appliance back on. If it
still will not switch on,
contact a qualified
electrician or the Miele
Service Department.