Miele KM 6350 Operating And Installation Instructions page 51

Ceramic hobs with induction
Table of Contents

Advertisement

Problem
There is a strange
smell or vapours
when a new appliance
is being used.
The power levels 1 to
9 flash.
After the hob is
switched on "LC"
appears in the timer
display for a few
seconds.
After the hob is
switched on "dE"
appears in the timer
display for a few
seconds.
The cooking zones do
not heat up.
A cooking zone or the
whole hob switches
off automatically.
The Booster has
deactivated early
automatically.
The cooking zone is
not working in the
usual way at the
power level set.
Possible cause
There is no pan on the
cooking zone, or the pan is
unsuitable.
The system lock is
activated.
The appliance is in
demonstration mode.
A cooking zone has been
in use for too long.
The overheating protection
mechanism has triggered.
The overheating protection
mechanism has triggered.
Problem solving guide
Remedy
The smell and any vapours
will dissipate after a short
time. They are not harmful
and do not indicate a faulty
connection or appliance.
Use a suitable pan (see
"Pans").
Deactivate the system lock
(see "Safety lock / System
lock").
Deactivate demonstration
mode (see
"Programming").
You can use the cooking
zone again by switching it
back on (see "Safety
switch-off").
See "Overheating
protection".
See "Overheating
protection".
51

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km6383

Table of Contents