Normal Mode - Panasonic EB-X400 Service Manual

7. Click "Download current Eeprom values to phone".
8. Click "OVERWRITE" button.
The TX, RX and Battery calibration values in the phone will be overwritten by the new values from the PC.

8.4.9. Normal Mode

NOTE: When calibration has been completed, the mobile should be set to normal_mode.
Press the power key to turn on the mobile phone.
Start the PhoneTool program.
The following screen will be displayed:
1. Click the"V24 AT# On", and check the log window. >>> "AT#OK".
2. Click the Check Connection button, and check the log window.>>> "Connection OK".
NOTE: If the message "ERROR! No Connection" is displayed, check the cable connections, power supply and that the
phone is switched on, then repeat steps 1 and 2.
3. Select "normal_mode", and check the log window displays the message "Sending to mobile ÅcOK."
4. Click the "Reset" button. The phone will power down automatically.
5. The phone is now in normal_mode.
– 8-21 –