Adjustment Mode - Panasonic EB-GD35 Service Manual

EB-GD35 EB-GD35C

6.5. Adjustment Mode

6.5.1 RF Calibration Procedure
NOTE: See Section 6.2 for a list of the equipment and setup procedures required to perform the following adjustment and
calibration procedures.
The following procedures MUST be performed after replacement or repair of the PCB. Failure to do so may result in incorrect
operation of the telephone.
The following adjustments MUST be made on BOARD.
There are two distinct calibration procedures to adjust RF performance. These procedures are:
1. Ramping gain (Section 6.5.2)
2. RSSI (Section 6.5.3)
The adjustment data selected during calibration is stored in Flash ROM.
http://cxema.ru
Figure 6.7: Test software screen
36