Download Print this page

Advertisement

Operating Instructions Part 1
Before operating this equipment please read these instructions
(parts 1 and 2) completely.

Advertisement

   Also See for Panasonic EB-X400

   Related Manuals for Panasonic EB-X400

   Summary of Contents for Panasonic EB-X400

  • Page 1

    Operating Instructions Part 1 Before operating this equipment please read these instructions (parts 1 and 2) completely.

  • Page 2: Table Of Contents

    Getting Started ... 1 Inserting and removing the SIM... 1 Attaching and removing the battery... 1 Charging the battery ... 2 Operation of battery level indicator... 2 Low battery power warning... 2 Keys & Displays ... 3 Keys... 4 Shortcuts ... 5 Illumination light...

  • Page 3

    Contents My Media ... 75 Pictures (My Media > Pictures)... 75 Sounds (My Media > Sounds) ... 76 Shortcuts... 77 Text templates ... 77 Memory status ... 78 Personal WAP/MMS Settings ... 79 Troubleshooting... 81 Important error messages... 82 Glossary of Terms... 83 Index...

  • Page 4: Getting Started

    Some services described in this manual are network dependent or may only be available on a subscription basis. Some functions are SIM dependent. For more information contact your service provider. Inserting and removing the SIM The SIM is inserted into the back of the phone. (See “Attaching and removing the battery”...

  • Page 5: Charging The Battery

    Getting Started Charging the battery Connecting and disconnecting the Fast Travel Charger The battery must be attached in the phone before the charger is connected. Do not force the connector as this may damage the phone and/or the charger. Connect the charger to the mains power supply. When the phone is charging, the charging indicator will light and a scrolling icon will appear in the main display.

  • Page 6: Keys & Displays

    Speaker One Push Auto Open button Press to open the handset Left Soft key Multi Function key Camera/Shutter/Alert mute Send key To answer a call or to make an outgoing call 1 key/Voicemail key Press and hold to call voicemail Asterisk key Charging Connector Camera Lens...

  • Page 7: Keys

    Keys & Displays Keys Navigation key: Select and save settings, and scroll/move through menus, text and Contacts. Also serves as shutter button for the camera and to control movements while playing games. < Left Soft key: Perform function displayed in lower left corner of the display. From Idle mode, press to open Messages menu.

  • Page 8: Shortcuts

    Shortcuts When you are familiar with the menu system, you can use the keypad to access features instead of navigating through the display menus. Short press (from Idle mode) Function A or 7 Messages @ or 3 Browser Menu/Alert mute/ <...

  • Page 9: Display

    Keys & Displays Display Main display With some operations, the display automatically clears after 2.5 seconds or after pressing any key. Status icons Different icons are shown, depending on the features you are using and the options you have selected. Icons appear on the main display as shown in the following table.

  • Page 10: How To Use This Phone

    Selecting a menu option From Idle mode, press the centre of the Navigation key display has 9 options. Press to perform function displayed in the lower left corner. How to Use This Phone < to open the main menu display. The main menu Main menu screen Main menu Press to Cancel/Exit...

  • Page 11: Symbols Used In This Manual

    How to Use This Phone Symbols used in this manual The table below shows the symbols used throughout these instructions and the corresponding meanings in the column on the right. Symbol < Press centre of the Navigation key to select option or to save 1537 Direction in which you can move on the display screen with the Navigation key Shows possibility of moving in any direction (up, down, left and right) on the display...

  • Page 12: Phone Basics And Managing Calls

    Phone Basics and Managing Calls Switching phone ON/OFF Press and hold D for 3 seconds to switch phone on • When the phone is switched on, a greeting may be displayed and the phone enters Idle mode. Press and hold D again to switch phone off When switching the phone off, use only Displaying menu 1 To access the menu, press <...

  • Page 13: Answering Calls

    Phone Basics and Managing Calls International dialling The international code for the destination country/region should be entered, followed by the area code and phone number. 1 Press and hold # 2 Enter country/region code 3 Enter area code and phone number C / < NOTE Many countries/regions include an initial “0”...

  • Page 14: Voicemail

    Voicemail You need to subscribe to the voicemail service through your service provider before you can retrieve voicemail messages. To check if voicemail access has been configured, press and hold . See “Voicemail” on page 48 on how to programme. 1 When a new voicemail message is received, an alert sounds and lower part of the display or you receive an SMS notification (depending on the local service)

  • Page 15: In-call Options

    Phone Basics and Managing Calls In-call options During a call: A for options 4 required option < / A Option Hold Call From Contacts Create SMS Inbox (SMS) Calendar Handsfree / Handheld Earpiece volume During a call: 4 / 2 to adjust earpiece volume Desktop Handsfree Desktop Handsfree allows you to have a conversation without holding the phone to your ear.

  • Page 16: Making A Second Call

    Incoming call while on a call During a call, you may receive another call. To enable this, Call Waiting must be on. (See “Call Waiting” on page 27.) Accept a second call: (The second call is active, the current call is put on hold) When two calls are connected, the following options are available by pressing A.

  • Page 17

    Phone Basics and Managing Calls Multi-party call A multi-party call has 3 or more people in conversation at the same time. (F) 1 Establish a multi-party call by merging two calls 2 Continue to add people to the multi-party call (up to 5 connections in total) by calling others or by accepting incoming calls When making a call or accepting an incoming call, the multi-party call is placed on hold.

  • Page 18: Call Log

    Phone Basics and Managing Calls Call log Recently dialled phone numbers, answered calls and missed calls are stored in the Call log. The numbers in the Call log list can be used to call, send messages or add to Contacts. You can also delete the numbers from the list. Viewing Call log 2 2 Dialled numbers, Answered calls or Missed calls 3 4 required phone number <...

  • Page 19

    Phone Basics and Managing Calls Saving a phone number from Call log into the Contacts list 2 2 Dialled numbers, Answered calls or Missed calls 3 4 required phone number < 5 4 Add to contacts < / A 6 4 Phone or SIM < / A 7 4 required icon <...

  • Page 20: Explore The Menus

    Call log Speed Dial list View groups Advanced (Service numbers) Applications (SIM Tool Kit) Alarm Sound recorder Calculator Infrared Browser PANASONIC BOX Settings Profiles Sound Vibration Alert Display Language Data connections GSM network Calls Security Time and date Any key answer...

  • Page 21: Settings Menu Structure

    Settings Menu Structure Profiles Sound Vibration Alert Display Language Settings Data connections GSM network Calls Security Time and date Any key answer Keyguard Service Charge is SIM dependent (E). Incoming Tone Incoming Volume Message Tone Message Volume Key Tone Key Volume Warning Tone Display language Input language...

  • Page 22: Settings

    Settings Profile setting You can switch between five profiles in your phone, each with a distinct combination of ring tone, ring volume, etc. Profiles are set up for use in different environments – for instance you might want to create a Quiet profile, a Meeting profile with a ring tone appropriate for formal occasions and an Outdoor profile for noisy environments.

  • Page 23

    Settings Settings Message Volume From Profiles menu 1 4 required profile A 2 4 Edit < / A 3 4 Message Volume < / A Profiles 4 4 / 2 adjust the volume level (0 - 4) < / A Key Tone From Profiles menu 1 4 required profile A...

  • Page 24: Tone Setting

    Settings Tone setting You can set ring tone, ring volume, etc. The ring tone can be changed to one of the tones from Preinstalled, My Media or Download. Incoming tone and Message tone can have different ring tones and volume assigned. Ring volume increases in steps to the level you selected.

  • Page 25: Vibration Alert Setting

    Settings Settings Setting Key Volume From Sound menu 1 4 Key Volume < / A 2 4 / 2 adjust the volume level (0 - 4) < / A Setting Warning Tone Sound From Sound menu 1 4 Warning Tone < / A 2 4 On or Off <...

  • Page 26: Display Setting

    Settings Display setting Setting Wallpaper From Display menu 1 4 Wallpaper < / A 2 4 Preinstalled, My Media or Download < / A Display 3 4 required data 4 To view and save, press < then < / A to save To save without viewing, press A Display Colour, Setting Display Colour Theme...

  • Page 27: Language Setting

    Settings Settings Language setting You can change the language used for display messages and/or text entry. From Language menu 1 4 Display language or Input language < / A Language 2 4 required language < / A Data connections setting Data GPRS settings and CSD settings are stored in the Data connections menu.

  • Page 28

    Settings When the Search Mode is set to Automatic the phone will automatically reselect a new network in order to maintain optimum network availability. The network list is used when the Search Mode is set to Automatic. The location numbers in the preferred network list show the search priority.

  • Page 29: Call Settings

    Settings Settings Call settings Call Diverts Voice, fax, and data calls can be diverted to different numbers in different situations. For example, you may want to divert voice calls to voice mail when the phone is switched off. To register a number to divert at first time: Calls From Calls menu 1 4 Call Diverts <...

  • Page 30: Call Waiting

    Settings To change the registered number to divert: From Calls menu 1 4 Call Diverts < / A 2 4 Divert Voice, Divert Fax or Divert Data < / A 3 4 the circumstances to initiate the divert A (Options) 4 4 On <...

  • Page 31: Call Duration

    Settings Settings Send my number You can set whether or not to show your phone number to another phone (Caller ID). From Calls menu 1 4 Send my number < / A 2 4 Network set, On or Off < / A Calls Call Duration Displays the duration of incoming or outgoing calls.

  • Page 32: Security Settings

    Settings Security settings The PIN protects your SIM against unauthorised use. If you enable the PIN, every time the phone is switched on, you will be prompted to enter the PIN code. The PIN2 controls security for the Fixed Dial store. PIN entry (Enabling/Disabling PIN entry) Security From Security menu...

  • Page 33: Call Barring

    Settings Settings Fixed Dial Fixed Dial is a part of Contacts, but with added security. When Fixed Dial is enabled: Only numbers that are in the Fixed Dial store may be dialled. Any manually dialled phone numbers must match a number already in the Fixed Dial store.

  • Page 34: Time And Date Setting

    Settings Time and date setting From Time and date menu 1 4 Time < / A 2 # - , to enter the time using 24 hour clock < / A 3 4 Date < / A 4 # - , to enter the date < / A Time and date Some settings may be lost if the battery is removed or remains discharged for...

  • Page 35: Keyguard Setting

    Settings Settings Keyguard setting Keyguard stops the keys from performing their normal function if accidentally pressed. When Keyguard is enabled, “ received, Keyguard is temporarily disabled and you can answer the call. Setting Keyguard Keyguard From Keyguard menu 1 “Would you like to lock keypad?” < / A From Idle display 1 Press and hold <...

  • Page 36: Camera

    Camera Taking a picture The camera range is 35 cm - The minimum illumination required is 5 lux. From Camera menu < or To store the image in My Media: (After capturing the image) (Available only when the phone is open) The picture will be saved in My Media / Pictures / Stored pictures.

  • Page 37: Viewing Pictures

    Camera Camera Saving and using pictures Once a picture has been taken it will be saved in My Media. To use a saved picture as your personal wallpaper or for Contacts, see “Setting Wallpaper” on page 23 and “Storing a number in your phone” on page 53. NOTE When My Media is full, pictures can be saved if you make space by Incoming calls during camera operation If an incoming call etc, is received during camera operation, the phone will exit the...

  • Page 38: Text Entry (edit)

    You can use alphanumeric characters to enter details into Contacts, to create text, email messages, etc. ® (T9 , T9 or T9) (Input language: English) # Alternatives . , - ? ! ’ @ : ; / 1 * / (Hold) Character list % A B C 2 (a b c 2) &...

  • Page 39: Input Mode

    Text Entry (Edit) Input mode Input mode change Input mode changes by pressing and holding (over 1 sec) Input mode Multi-tap -> Numerals -> T9 (Selected tegic language) (Abc -> 0-9 -> T9 ) The phone keeps the selected input mode. Text input ®...

  • Page 40: Messages Menu Structure

    Messages Chat and Web mail are network operator dependent. Messages Menu Structure Create new Inbox Archive Voicemail (Chat) Cell Broadcast Settings Memory status Call Mailbox (Web mail) Set Mailbox number On/Off Read messages Options...

  • Page 41: Messages

    Messages Messages MMS (Multimedia Messaging Service) Your phone is designed to be compatible with certain Multimedia Messaging Services (MMS). You can send pictures and music with text messages. The recipient can play it as a slide show. MMS messages can be sent to another mobile phone with MMS capability or to an email address.

  • Page 42: Create New

    Messages Creating a slide In order to send an MMS with more than one picture, text or sound, you need to add new slides to the MMS. From Create new menu 1 4 MMS < / A 2 4 Add picture, Add text or Add sound < / A, then select a picture or Create new sound, or enter a text 3 4 Slides <...

  • Page 43

    Messages Messages Sending a message When a message is completed, press 1 4 Send < / A 2 4 Add subject < 3 Enter subject < 4 4 Add recipient < Create new 5 4 From Contacts, Enter number or Enter address < / A 6 When you select From Contacts, 4 required contact A When you select Enter number, enter number <...

  • Page 44

    Messages Receiving messages When you receive an MMS message, the message icon ( with a tone, illumination, and/or vibration. From Inbox menu 1 4 MMS < / A 2 4 required notification < Inbox The following options are available by pressing A. 4 required option <...

  • Page 45

    Messages Messages Viewing message lists The following messages are stored in Archive. Outbox: When a message has been sent it is stored in the Outbox. Unsent: Undelivered messages are stored in Unsent. Drafts: Use to create a message draft. Archive From Archive menu 1 4 MMS <...

  • Page 46: Setting Options

    Messages Setting the MMS message server / profile MMS message server and profile setting must be done before you can send or receive an MMS message. Please check with your network operator if additional settings are required. You can select one of five server URLs on the phone. From Settings menu (Message server) 1 4 MMS <...

  • Page 47: Sms (short Message Service)

    Messages Messages SMS (Short Message Service) You can receive, display, edit and/or send text messages on any network that has a roaming agreement. (Dependent on the recipient’s phone parameters.) The message centre number should be preprogrammed on the SIM, changing this number (see page 47) may cause failure of a text message.

  • Page 48

    Messages Receiving messages When you receive an SMS message, the message icon ( with a tone, illumination, and/or vibration. Reading a received message From Inbox menu 1 4 SMS < / A Inbox 2 4 required message < When viewing messages, the following options are available by pressing A. 4 required option <...

  • Page 49

    Messages Messages Viewing message lists These message lists are stored in Archive. Outbox: When a message has been sent, it is stored in the Outbox. Unsent: If the transmission of an SMS message fails, the message is stored in Archive Draft: Use to create a message draft.

  • Page 50

    Messages Setting the Message Centre number The message centre number should be preprogrammed on the SIM, changing this number may cause failure of a text message. From Settings menu 1 4 SMS < / A 2 4 Message Centre < / A Settings 3 Enter message centre number in international dial format (see “International dialling”...

  • Page 51: Voicemail

    Messages Messages Voicemail Voicemail is an innovative service that lets you stay up-to-date with all of your messages. You must subscribe to voicemail through your service provider before you can retrieve voicemail or email messages. Voicemail Listening to Voicemail messages From Voicemail menu 4 Call Mailbox <...

  • Page 52: Cell Broadcast

    Messages Cell Broadcast You can receive messages on specified topics, such as traffic and weather information, from your network operator. Setting Cell Broadcast On/Off From Cell Broadcast menu Cell 1 4 On/Off < / A Broadcast 2 4 On or Off < / A Reading a received message From Cell Broadcast menu 1 4 Read messages <...

  • Page 53: Contacts Menu Structure

    Contacts Menu Structure Contacts Service numbers is SIM dependent (E). Contacts list Phone Add contact Dialled numbers Call log Answered calls Missed calls Speed Dial list View groups My Number Advanced Group Settings Memory status Copy from SIM (Service numbers)

  • Page 54: Contacts

    Contacts Browsing Contacts You can search Contacts by name. When browsing by name, pressing a letter key will take you to the first entry starting with that letter. From Contacts list menu 4 required contact < Contacts list Options in Contacts From Contacts list menu 1 4 required contact A 2 4 required option <...

  • Page 55: Storing

    Contacts Contacts Storing Storing a number in SIM In the SIM, you can store: name, phone number. The length of name and number and the total amount of data are dependent on your SIM. From Add contact menu Phone numbers can be stored in 1 4 SIM <...

  • Page 56

    Contacts Storing a number in your phone In the phone, you can store: name, phone no. 1, phone no. 2, email address, picture and group. From Add contact menu 1 4 Phone < / A 2 4 name icon ( 3 Enter the name <...

  • Page 57: Call Log

    Contacts Contacts Call log Recently dialled phone numbers, answered calls and missed calls are stored in the Call log. The numbers in the Call log list can be used to call, send messages or add to Contacts. You can also delete the numbers from the list. Viewing Call log Call log From Call log menu...

  • Page 58: Speed Dial

    Contacts Options in Call log In each Call log list, the following options are available by pressing A. 4 required option < / A Option Call Call log Send message Add to contacts Delete Delete all Speed dial Phone numbers from the Speed dial of Contacts can be dialled quickly. Speed In Idle mode, press and hold a number key (2 - 9).

  • Page 59: Grouping Contacts Entries

    Contacts Contacts Grouping Contacts entries The ability to group Contacts entries together is an extra function of Phone Contacts. Groups are used to collect together types of Contacts entries, e.g. business and personal. Each group can be suitably titled for quick access to the entries contained within.

  • Page 60: My Number

    Contacts My Number My Number is a contact where you can store your own numbers. Adding numbers From Advanced menu 1 4 My Number < / A Advanced 2 4 Mobile Profile or SIM Profile < / A 3 When My Number is empty, press < / A then go to step 5 When My Number is already stored in SIM Profile, press A 4 4 Create <...

  • Page 61: Group Settings

    Contacts Contacts Group settings You can change the group name and attach a sound to the group. Changing group names From Advanced menu 1 4 Group Settings < / A Advanced 2 4 required group < 3 Press and hold @ to clear the current name 4 Enter new group name <...

  • Page 62: Browser Menu Structure

    Browser Menu Structure Browser PANASONIC BOX...

  • Page 63: Browser

    Browser Browser Server setting Before Internet services can be accessed, you need to subscribe to your network operator or Internet Service Provider (ISP) to enable the relevant configuration information. Please contact your network service provider to ensure that your network settings are correct. Modifying previously entered settings may cause failure of the browser.

  • Page 64: Browser Options

    Browser Browser options From Browser menu 1 A (Options) 2 4 select from below options < / A Option Select Bookmarks Enter address Save image Set as bookmark Service Inbox Reload page Advanced Settings Exit browser Browser options (Bookmarks) From Browser menu or contents 1 A (Options) 2 4 Bookmarks <...

  • Page 65: Browser Options (enter Address)

    Browser Browser Browser options (Enter address) You can jump to the required content by entering the URL. From Browser menu or contents 1 A (Options) 2 4 Enter address < / A 3 Enter URL < Browser options (Save image) Displayed images can be saved in “My Media”.

  • Page 66: Browser Options (reload Page)

    Browser Browser options (Reload page) Current page can be reloaded. From contents 1 A (Options) 2 4 Reload page < / A to reload this page Browser options (Advanced) From Browser menu or contents 1 A (Options) 2 4 Advanced < / A NOTE View address is available only from contents.

  • Page 67: Browser Options (settings)

    Browser Browser Browser options (Settings) From Browser menu or contents 1 A (Options) 2 4 Settings < / A Browser options (Settings - WAP profiles) Set up WAP browser. From Settings menu 1 4 WAP profiles < / A 2 4 required profile 3 <...

  • Page 68: Games Menu Structure

    Games Menu Structure Games Games Download Settings...

  • Page 69: Games

    Games Games Selecting games You have one pre-installed Java™ application – MobileGolf. The downloaded Java™ applications may also be listed. From Games menu 4 Java™ application you want to play < The following options are available by pressing A. 4 required option < / A Games Option Properties...

  • Page 70: Settings

    Games Settings Java™ applications settings, such as volume and backlight etc, can be changed. Settings Sound volume Backlight Settings Vibration Online service Memory status Reset Information If “Online service” is selected more options are displayed as follows. Ask ... When a Java™ application with HTTP access is activated the Yes ...

  • Page 71: Applications Menu Structure

    Applications Menu Structure Applications SIM Tool Kit is SIM dependent (E). The menu name will be changed. (SIM Tool Kit) Alarm Sound recorder Calculator Infrared...

  • Page 72: Applications

    Appli- STK (SIM Tool Kit) cations This function is SIM dependent (E). This menu name will be changed. Alarm Setting the alarm From Alarm menu 1 4alarm icon ( Tool Kit 2 4clock icon ( clock) < / A 3 4alarm repetition icon ( Weekdays or Weekend <...

  • Page 73: Sound Recorder

    Applications Applications Snooze Function Snooze Function lets the alarm repeat 5 times if you do not press stopping the alarm or press To stop Snooze Function: Press If you press Alarm “End of alarm” is displayed. NOTE The alarm goes off at the time you set even if the phone is off. Sound recorder Sound You can record sounds or your voice in My Media.

  • Page 74: Infrared

    Applications Infrared By using the Infrared connection with another X400 or with other devices with an infrared port, you can transfer data between the devices. Preparing for Infrared connection Place the X400 and another device with an Infrared port within the effective Infrared Infrared connection range of each other.

  • Page 75

    Applications Applications Sending Contacts From Idle display 1 < 2 0 Contacts < / A 3 4 Contacts list < / A Infrared 4 4 select contact to send A 5 4 Send by Infrared < / A Receiving data via Infrared port You need to activate Infrared before receiving data.

  • Page 76: Calendar

    Calendar Viewing calendar From Calendar menu 0 will display recent and future calendars The following options are available by pressing A. 4 required option < / A Option Go to date Week starts on Explanation Jump to the required date Select which day the week starts on Calendar...

  • Page 77: My Media Menu Structure

    My Media Menu Structure My Media Stored pictures Pictures Download Take new picture Stored sounds Sounds Download Record new sound Create MMS Shortcuts Inbox (MMS) Create SMS Inbox (SMS) Profiles Alarm Text templates Memory status...

  • Page 78: My Media

    My Media Pictures (My Media > Pictures) Pictures taken by the camera or images downloaded from the Internet can be managed. Viewing picture / image The data saved in From Pictures menu the X400 is 1 4 Stored pictures < / A located in My 2 4 required picture / image <...

  • Page 79: Sounds (my Media > Sounds)

    My Media My Media Sounds (My Media > Sounds) Downloaded sounds and Recorded sounds are stored in Stored sounds. Checking sounds From Sounds menu 1 4 Stored sounds < / A Sounds 2 4 required sound < Downloading sounds From Sounds menu 1 4 Download <...

  • Page 80: Shortcuts

    My Media Shortcuts You can create shortcuts you want to use in My Media. Viewing shortcuts From Shortcuts menu 4 required content < Shortcuts The following options are available by pressing A. 4 required option < / A Option Edit Move Delete Access to shortcuts:...

  • Page 81: Memory Status

    My Media My Media Memory status You can see how much data is stored in the individual folders in My Media. The memory in “My Media” is separate from the MMS storage and Java™ storage. Memory status...

  • Page 82: Personal Wap/mms Settings

    Use the table below to record your GSM/GPRS WAP/MMS settings. Item No.1 Profile name Homepage Gateway Port (Non secure / Secure) Data connections Profile name Account Password Call type Phone number Idle timer GPRS Profile name Account Password APN name Auth type Normal / Secured / None (PAP) (CHAP)

  • Page 83

    Personal WAP/MMS Settings Item No.6 Profile name Homepage Gateway Port (Non secure / Secure) Data connections Profile name Account Password Call type Phone number Idle timer GPRS Profile name Account Password APN name Auth type Normal / Secured / None (PAP) (CHAP) Message server Provisioning information setting...

  • Page 84: Troubleshooting

    Should any problem persist, contact your dealer. Problem Phone will not switch on. Extremely short battery life for a new battery. Short battery life for an old battery. The charging indicator does not light, the battery level indicator does not appear and the phone cannot be switched on when charging.

  • Page 85: Important Error Messages

    Troubleshooting Important error messages These are some of the most important error messages which may be displayed: Failed Roaming in the selected area is not allowed. Roaming with the selected network is not allowed. The network has detected an authentication failure because your SIM is not registered with that network –...

  • Page 86: Glossary Of Terms

    Access Point Name. Directs the user to the gateway or the required service. CHAP Challenge Handshake Authentication Protocol. A security feature in the GPRS network. Copy Copies selected text from a short text message without removing it from the original message. Circuit Switched Data.

  • Page 87: Index

    Index Add contact ... 52 Advanced ... 57 Alarm... 69 Alert mute... 4 Any key answer... 10, 31 Applications... 69 Archive MMS ... 42 SMS ... 46 Backlight time... 23 Battery Attaching... 1 Battery level indicator ... 2 Charging ... 2 Low battery power warning...

  • Page 88

    Menu option... 7 Message Tone ... 19, 21 Message Volume ... 20, 21 Messages ... 38 MMS (Multimedia Messaging Service) ... 38 Multi-party call... 14 My Media ... 75 My Number ... 57 Network setting ... 24 New Search ... 24 Pause dial ...

This manual also for:

X400

Comments to this Manuals

Symbols: 0
Latest comments: