Appendix; Important Safety Instructions - Devolo dLAN 200 AVpro User Manual

6 Appendix

For the permitted voltage range for
operating the device and the power
consumption, refer to the label on
the rear side of the device. Additio-
nal technical information is availab-
le on the product sheet.

6.1 Important safety instructions

All safety and operating instructions should be read
and understood before using the device, and should be
kept for future reference.
b Never open the device. There are no user-servi-
ceable parts inside the device.
Do not try to service this product
yourself! Contact qualified techni-
cians each and every time your de-
vice needs maintenance. There is a
risk of electric shock!
b Use the device in a dry location only.
The outlet must be within reach of
the connected network device. The
dLAN 200 AVpro Wireless N and the network
device must be easily accessible.
b To switch the device off, pull the power plug out
of the power outlet.
b To disconnect the device from the power supply
grid, pull the power plug.
b Do not keep the device in direct sunlight.
b Do not insert any objects into the openings of the
device.
b Slots and openings on the case serve as ventila-
tion. Never block or cover them.
b Never set up the device near a heater or radiator.
b The device should be located only where sufficient
ventilation can be ensured.
b Disconnect the device from the power supply grid
before cleaning. Use a moist towel to clean the
device. Never use water, paint thinner, benzene,
alcohol or other strong cleaning agents when
cleaning the device, as these could damage the
case.
b Never use the device with a power supply that
does not meet the specifications provided on the
rating plate.
b In the event of damage, disconnect the device
from the power supply grid and contact customer
service. This applies, for example, if
devolo dLAN 200 AVpro Wireless N
Appendix 71