Devolo dLAN 200 AVpro User Manual page 60

WLAN ports can be assigned only to a VLAN.
For more detailed help on verifying the set-
tings, refer to our online FAQs on our website
at www.devolo.com.
If the WLAN mode Access Point is enabled, only the
access points are assigned to the VLANs. If the WLAN
mode WLAN client is enabled, only the WLAN client
is assigned to the VLAN.
The behaviour of the port is configured via the columns
Enable Tx Force Untag, Acceptable Frame Type
(All/Tagged only) and PVID:
b If the option Enable Tx Force Untag is enabled,
all outgoing frames are sent from this port as
"untagged".
b If Enable Tx Force Untag is not enabled, all
outgoing frames are sent from this port as
"tagged".
factory defaults
The
dLAN 200 AVpro Wireless N have the option
Enable Tx Force Untag enabled, i.e. all
frames are sent "untagged".
b The option Acceptable Frame Type (All/
Tagged only) refers to the incoming data path of
the ports. It determines whether all frames i.e.
"tagged" and "untagged" (All) are accepted or
only "tagged" frames (Tagged Only). If the All
setting is enabled, all "untagged" frames are for-
warded to the VLAN with the PVID configured for
this port.
b Under PVID the VLAN ID is specified, which is
assigned received "untagged" frames. In the
setting Acceptable Frame Type (Tagged only)
the configured PVID is insignificant.
of the
Network configuration 59
devolo dLAN 200 AVpro Wireless N