Wlan Configuration As Client - Devolo dLAN 200 AVpro User Manual

50 Network configuration
devolo dLAN 200 AVpro Wireless N
encryption keys and establish a secure WLAN con-
nection. The WLAN LED on the front panel indi-
cates the synchronisation process by flashing.
WPS via PIN:
To interconnect WLAN clients securely in your
wireless network via PIN variants, enter an indi-
vidualised key in the configuration interface under
WLAN configuration
Setup (WPS) PIN and start the encryption pro-
cess by pressing the Start setup button.
Open the configuration interface of the WLAN cli-
ent to be added and transmit the PIN selected on
the dLAN 200 AVpro Wireless N. Confirm the
encryption process as described there. Now the
devices exchange their encryption keys and estab-
lish a secure WLAN connection. The WLAN LED on
the front panel indicates the synchronisation pro-
cess by flashing.
Use of the WPS process implies either WPA or WPA2.
For that reason, keep in mind the following automatic
settings depending on the encryption standard (also
refer to 4.4.1 Security), i.e.
b if under WLAN configuration
No encryption or WEP is selected in advance,
WPA2 is set automatically. The newly generated
password is displayed under WLAN configura-
tion Access Point in the Key field.
b if under WLAN configuration
WEP is selected in advance, WPA2 is set auto-
matically. The newly generated password is dis-
played under WLAN configuration
Point in the Key field.
b if under WLAN configuration
Wi-Fi Protected WPA is selected in advance, this setting remains
with the previously assigned password.
b if under WLAN configuration
WPA2 is selected in advance, this setting remains
with the previously assigned password.

4.7 WLAN configuration as client

If you would like the dLAN 200 AVpro Wireless N to
act as client, select WLAN client mode under WLAN
configuration and confirm your entry with Save
WLAN mode.
Access Point
Access Point
Access Point
Access Point
The WPS function is supported only
by access point 1.
Access