Create Vlan; Overview Of Configured Vlans - Devolo dLAN 200 AVpro User Manual

4.8.1 Create VLAN

The factory defaults have VLAN 1 configured with
VLAN ID 1. You can configure additional VLANs under
Create VLAN. In doing so, a VLAN (VLAN 1 to VLAN
15) has to be selected and a VLAN ID (1 to 4094) as-
signed. When creating VLANs, already assigned VLAN
IDs cannot be assigned a second time. Configured
VLANs are illustrated in the overview.
When configuring the VLANs, the
VLAN port settings and when defin-
ing the Management VLAN, the con-
figuration interface
dLAN 200 AVpro Wireless N should
remain accessible, i.e. configurable.
If you ever "lock" yourself out in
spite of this, the adapter has to be
returned to the factory defaults by
being reset (see the Reset section).

4.8.2 Overview of configured VLANs

To delete a VLAN, first enable it and then confirm with
Delete. It is not possible to delete all VLANs; one
VLAN must remain configured.
An enabled VLAN configuration re-
quires at least one configured
VLAN, since otherwise the configu-
ration interface is no longer acces-
sible and no connection of the port
is enabled.
of the
Network configuration 57
devolo dLAN 200 AVpro Wireless N