Checking Status In Wireless Multiple Flash-Unit Photography; Checking Flash Operation Using The Flash-Ready Indicator Or Sound Monitor - Nikon Speedlight SB-700 User Manual

Checking Status in Wireless Multiple Flash-unit Photography

The × ash-ready indicator on the SB-700 and the sound monitor can
be used to check that wireless multiple × ash-unit photography is
operating during and after taking a picture.
• When the SB-700 is used as a wireless remote flash unit, the sound
monitor can be used to check operational status. This function can
be activated or canceled using custom setting (0B-20). It is set to
activate as the default.
Checking flash operation using the flash-ready indicator
or sound monitor
Master
Remote k ash unit
k ash unit
Flash-ready Flash-ready
indicator indicator
The back
indicator
lights
Lights up up and
the front
indicator
blinks.
The back
indicator
Goes out lights
and lights up and
up when the front
ready to Ö re indicator
blinks or
goes out.
Sound
monitor
One beep Ready to Ö re
Two short
Fired properly
beeps
Speedlight status
D
D–27