Warning Indicators - Troubleshooting - Nikon Speedlight SB-700 User Manual

Troubleshooting
Warning indicators
Warning indicator
Battery power weak
indicator appears.
Thermal cut-out
indicator appears.
Safety circuit activation
indicator appears.
The × ash-ready
indicator blinks after
Ö ring.
The remote × ash unit
beeps for approx.
3 seconds.
H
H–3
Cause
All operations have
stopped due to low
battery power.
All operations have
been suspended
because the SB-700
has overheated
and could become
damaged.
All functions other
than the power
switch are inoperable
because of power
abnormalities.
Underexposure may
have occurred.
Underexposure may
have occurred.
Solution
Replace the
batteries.
Allow the SB-700 to
cool down.
Turn off the power,
remove the batteries,
and contact your
retailer or Nikon
representative.
Use a wider aperture
or move the × ash
unit closer to the
subject and reshoot.
Use a wider
aperture, move the
× ash unit closer
to the subject or
change the position
of the × ash unit and
reshoot.
0
B-10
E-31
—
C-5
C-15
D-28
D-28