Highlight Metallic Surfaces - Nikon Speedlight SB-700 User Manual

Without × ash
SB-700 setting order
Camera settings
Any exposure mode is ok.

Highlight metallic surfaces

One remote × ash unit illuminates the subject
from bottom while the other creates highlights
on the subject to show its metallic texture. Flash
output level ratio is set to 1:1.
Tracing paper
SB-700
D300S
Glass plate
AF-S Micro NIKKOR 60mm f/2.8G ED
Tips—Quick wireless control mode
Allows you to intuitively
control the light balance of
two remote × ash units.
SB-700
20 —
SB-700