Table of Contents
Advertisement
Verifying installation
21
Lexmark ImageQuick SIMM Setup Guide
4
Align the two screws in the system board cover
with the holes on the printer frame.
5
Tighten the two screws.
6
Connect the printer cables and power cord, and
turn the printer on.
Print a menu settings page. (See page 3 for
instructions.) If the SIMM is installed correctly,
"ImageQuick SIMM" appears under the Printer
Information section.
After verifying the installation, you may want to
reset your printer settings. Refer to the menu
settings page you printed and saved before
installing the SIMM.
Advertisement
Table of Contents
