Advertisement
PREPARATION AND ON/OFF FUNCTION
1.
Remove the unit from its packaging.
2.
If the humidity function is required, lift up the top cover of the machine and fill where
indicated. Do not put water into the compartment marked "ICE ONLY". Only fill with
cold clean water indicated "WATER ONLY".
Water Inlet
(WATER ONLY)
Fill according to level indicator on the front of the machine.
3.
Switch on at the mains and press the "SPEED/ON" control which starts the appliance.
4.
If the unit is required to be on continuously, this is automatic and the timer control does
not need to be used. The timer control is only used to pro-set specific operating times
required.
5.
Operate the "COOL" and "SWING" functions as required.
6.
To switch off at any time, depress the "OFF" button.
DO NOT OVERFILL
Always use clean tap water and do not allow the same water to stay in the machine of
extended periods of time. It is recommended that any water left in the machine for 3 or
more days should be drained away via the drain plug provided.
IMPORTANT
1.
Do not overfill with water (Check water level at front).
2.
Only fill halfway with water if using ice in conjunction with water.
3.
Make sure drain plug is tight before filling. When draining out water please ensure the
drain plug is refitted correctly and tightly (Finger tight sufficient).
4.
Only use cold clean water.
5.
Only fill with water via the water compartment where indicated and ice in the
compartment where indicated.
6.
The unit is fit with a number of safety devices one of which automatically stops all
functions of the machine to dry out for 24 hours before re-starting.
7.
If the mains lead becomes damaged, please contact the store where you bought the
appliance.
Top Cover
Ice Container
(ICE ONLY)
P
R
E
P
A
R
A
T
I
O
N
S
4‐
Advertisement
