Lubrication - Honda TL5040 Operator's Manual

\
adjusting bail
tractor

LUBRICATION

BEFORE
EACH USE
1 Driveline Universal Joints
each fitting using grease gun (fig. 27).
-
2 Driveline Disconnect driveline and separate
sections. Apply grease to male tube.
Reassemble driveline. (fig. 8)
EVERY 40 HOURS
3 Rotor Shaft Bearing
grease to grease fitting at right end of rotor
shaft using hand pump grease gun (fig. 26).
........................................................
Chain Housing Oil
......................................................................................................
Gearbox Oil
..............................................................................................................................
Grease
Fig. 25
end
Fig. 27
-
Apply grease to
-
Apply 2-3 shots of
. tiller
Driveline
-
4 Input Gearbox With tiller level, remove oil
level check plug on rear of gearbox housing.
Correct oil level .is at bottom of check plug.
Add oil if necessary. Gearbox capacity
5
Lateral chain housing
remove oil level check plug on side of
housing. Correct oil level is at bottom of
check plug. Add oil if necessary. Chain
housing capacity is 28
AGMA 8EP Ind gear oil or SAE
(when the first oil is unavailable)
Grease lltllng
Fig. 26
end
14 oz.
-
With tiller level,
oz.
140 GL 5 gear oil
80 W - 90 wt. oil
lithium base grease
13