Initializing the menu settings
Initializing the recorder settings will restore all menu settings (excluding the date and time
setting) to the factory default.
Note:
· Initializing the recorder settings will not delete any data on the internal memory or
microSD card. For information on initializing the internal memory or a microSD card,
refer to
page
Procedure:
Press the [MENU/ENTER] button for at least two (2) seconds while the
main screen is displayed, press the [VOL +/–] buttons to select
[COMMON MENU] [MENU RESET] [YES], then press the [MENU/
ENTER] button.
If you decide not to initialize the settings, select [CANCEL].
Checking the firmware version
You can check the version number of the recorder's firmware by following the procedure below.
Procedure:
Press the [MENU/ENTER] button for at least two (2) seconds while the
main screen is displayed, press the [VOL +/–] buttons to select
[COMMON MENU] [VERSION], then press the [MENU/ENTER]
button.
The firmware version will be displayed.
POCKETRAK W24 Reference Manual
53.
11
Preference Settings
33
MENU RESET
CANCEL
YES
33
VERSION
Ver 1.00
62