Selecting A Recording Eq Option - Yamaha POCKETRAK W24 Reference Manual

Selecting a recording EQ option

1.
Set the [ALC] switch to "OFF."
Press the [FOLDER/A-B REPEAT] button  the [VOL +/–], [
2.
select a folder into which to record, then press the [MENU/ENTER] button.
Select a folder from folders A–D.
3.
Press the [REC/PAUSE
The unit displays the [STANDBY] indicator.
4.
Press and hold down the [MENU/ENTER] button for at least two (2) seconds while
the [STANDBY] indicator is displayed.
The unit displays the REC MENU screen.
5.
Press the [VOL +/–] buttons to select [RECORDING EQ], then
press the [MENU/ENTER] button.
The unit displays the recording EQ screen.
6.
Press the [
You can select from eight recording EQ presets and one USER recording EQ (which
enables you to customize the EQ settings).
Hint:
· For information on how to customize the USER recording EQ option, refer to
"Customizing the recording EQ" on
7.
Press the [MENU/ENTER] button.
The selection of the recording EQ is confirmed. Press the [STOP/ESC
display the [STANDBY] indicator. Adjust the recording level, then press the [REC/PAUSE
] button again to start recording.
Note:
· To cancel the operation, press the [STOP/ESC
POCKETRAK W24 Reference Manual
] button.
]/[ ] buttons to select the desired recording EQ option.
page 20.
] button.
3
Recording Settings
]/[ ] buttons to
20
PCM 44.1K 16bit
L
A
STANDBY
091101 _ 1712.WAV
L
R
0:00:00
–30dB
3:02
20
REC MENU
HPF
PEAK HOLD
RECORDING EQ
] button to
19