Yamaha POCKETRAK W24 Reference Manual page 57

■
Completing the timer settings
1.
Press the [VOL +/–] buttons to select [STORE], then press the
[MENU/ENTER] button.
The programmed timer settings are confirmed, and the unit displays
the [COMMON MENU] screen.
2.
Press the [STOP/ESC
The unit displays the main screen.
Note:
· Initializing the calendar (date and time) will reset all timer settings to "OFF."
· The timer recording (or playback) may fail under the following circumstances:
- The internal memory (or microSD card) does not have sufficient memory space for
the specified duration of the timer recording.
- The file (for playback) or the folder (for recording) in the microSD card has been
specified, but the microSD card has not been inserted in the recorder.
- You attempted to program a timer recording that would cause the maximum
number of recordable files (199) to be exceeded.
- The recorder is connected to the computer, and is unable to start the timer
operation at the programmed time.
- The battery is exhausted or the power to the unit turned off during the timer
recording (or playback).
· If the timer fails for some reason, one of the following will occur:
If a REPEAT [ONCE] timer recording fails, the timer will be turned off.
If a REPEAT [DAILY] or [WEEKLY] timer recording fails, the timer will remain on.
POCKETRAK W24 Reference Manual
] button twice.
10
Using the Timer Function
TIMER
REC MODE:PCM
44.1kHz 16bit
FOLDER:MIC _ A
STORE CANCEL
33
2/2
57