Changing The Led Setting - Yamaha POCKETRAK W24 Reference Manual

Changing the LED setting

You can set the LED indicator so that it will light up during recording or playback (the REC/PLAY
option), or NOT light up during recording or playback (the OFF option). Alternatively, you can
set the indicator so that it will function as a recording peak LED indicator (the PEAK/PLAY option),
in which case the LED indicator will flash only at recording peaks, and otherwise turn off during
recording.
1.
Press and hold down the [MENU/ENTER] button for at least two
(2) seconds while the main screen is displayed, select [COMMON
MENU]  [REC/PLAY LED], then press the [MENU/ENTER]
button.
2.
Press the [VOL +/–] buttons to select [OFF], [REC/PLAY] or [PEAK/
PLAY], then press the [MENU/ENTER] button.
[OFF]
[REC/PLAY]
[PEAK/PLAY]
3.
Press the [STOP/ESC
The unit displays the main screen.
POCKETRAK W24 Reference Manual
The LED indicator remains off during recording, recording
standby mode, recording pause mode, and playback.
The LED indicator lights up red during recording and green
during playback.
The LED indicator flashes red rapidly during excessive
recording peaks. The LED indicator flashes red slowly
during recording standby mode or recording pause mode.
The LED indicator flashes red rapidly during excessive
recording peaks. The LED indicator remains off during
recording, recording standby mode, and recording pause
mode. The LED indicator lights up green during playback.
] button twice.
3
Recording Settings
A.D
VAS
COMMON MENU
BEEP SOUND
REC/PLAY LED
DATE & TIME
REMOTE
TIMER & ALARM
A.D
VAS
REC/PLAY LED
OFF
REC/PLAY
PEAK/PLAY
25