Engine Oil Change - Honda HS624 Owner's Manual

SERVICING YOUR HONDA SNOWBLOWER
ENGINE OIL CHANGE
Drain the oil while the engine is still warm to assure rapid and complete
draining.
1. Place the snowblower on a level surface. If your snowblower is the track
type, use the foot pedal (page 14) to raise the engine.
2.
Place a suitable container below the engine to catch the used oil, then
remove the oil filler cap/dipstick and the drain plug.
HS1132 ONLY:
To avoid loosening the drain plug extension, hold it with a 14 mm wrench
while loosening the drain plug with a 10 mm wrench.
HS1132:
EXTENSION
DRAIN
PLUG
3. Allow the used oil to drain completely, then reinstall the drain plug, and
tighten it securely.
Improper disposal of engine oil can be harmful to the enviromnment. If you
change your own oil, please dispose of used motor oil properly. Put it in a
sealed container, and take it a recycling center. Do not throw it in the trash,
pour it on the ground, or down a drain.
41