Honda HS624 Owner's Manual page 46

Honda snow blower owner's manual
Hide thumbs Also See for HS624:
Table of Contents

Advertisement

~
SERVICING YOUR HONDA SNOWBLOWER
If the fluid level is low, add HONDA HYDROSTATIC FLUID.
pEEq
The use of other hydrostatic fluids will reduce transmission performance and
may damage the transmission. Use only HONDA HYDROSTATIC FLUID.
1. Unscrew the reservoir cap and remove the seal. Be careful to prevent dirt,
water, or snow from entering the reservoir.
2. Add HONDA HYDROSTATIC FLUID to bring the fluid level to the UPPER
limit mark at room temperature, or to the appropriate level shown in the
temperature chart. Do not overfill.
3. Reinstall the seal, and tighten the cap securely.
(68°F)
(50°F)
(32°F)
-1
0°C
(1 4°F)
Oil level
Between upper and lower limit marks
(approx. 5 mm (0.20 in) above lower limit marks)
Slightly above lower limit mark
(approx. 2 mm (0.08 in) above lower limit mark)
Slightly below lower limit mark
(approx. 1 mm (0.04 in) below lower limit mark)
Between lower limit mark and bottom of reservoir
(approx. 4 mm (0.16 in) below lower limit mark)
44

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hs724Hs828Hs928Hs1132

Table of Contents