Wireless Mode Screen - LevelOne WAP-6011 User Manual

Wireless Access Point User Guide

Wireless Mode Screen

Clicking the Wireless Mode link on the main menu will result in a screen like the following.
Data - Wireless Mode Screen
Wireless Mode
Mode
Figure 9: Wireless Mode Screen
Select the desired mode:

AP mode - operate as a normal Access Point

Station - Infrastructure - Enter the SSID of the access
point whose signal you would like to join or click on Site
Survey to see a list of available access points.

Bridge - Point-to-Point - Bridge to a single AP. You must
provide the MAC address of the other AP in the PTP
Bridge AP MAC Address field.

Bridge - Multi-Point - Select this only if this AP is the
"Master" for a group of Bridge-mode APs. The other
Bridge-mode APs must be set to Point-to-Point Bridge
mode, using this AP's MAC address. They then send all
traffic to this "Master".

WDS Repeater - act as a repeater for another Access Point.
If selected, you must provide the address (MAC address) of
the other AP in the Remote AP MAC Address field. In this
mode, all traffic is sent to the specified AP.

Universal Repeater - act as an universal repeater for
another Access Point. If selected, you must provide the ad-
dress (MAC address) of the other AP in the Remote AP
MAC Address field. In this mode, all traffic is sent to the
specified AP.
12