LevelOne 54Mbps Wireless AP Router User Guide
Wireless Screen
The Wireless Access Point settings must match the other Wireless stations.
Note that the LevelOne 54Mbps Wireless AP Router will automatically accept both 802.11b
and 802.11g connections, and no configuration is required for this feature.
To change the LevelOne 54Mbps Wireless AP Router's default settings for the Wireless
Access Point feature, use the Wireless link on the main menu to reach the Wireless screen. An
example screen is shown below.
Data - Wireless Screen
Identification
Regulatory
Domain
Station name
SSID
(ESSID)
Figure 7: Wireless Screen
It is illegal to use this device in any location outside of the regulatory
domain.
This is the same as the "Device Name" for the LevelOne 54Mbps
Wireless AP Router.
On your PC, some Wireless status screens may display this name as the
name of the Access Point in use.
•
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set Identi-
fier).
•
To communicate, all Wireless stations should use the same
SSID/ESSID.
16