Inserting And Removing A Sim - HP Laptop User Manual

in the HP Mobile Broadband information provided with your computer or the mobile network operator
may provide it separately from the computer.
For information about inserting and removing the SIM, see the
on page 19
For information about HP Mobile Broadband and how to activate service with a preferred mobile
network operator, see the HP Mobile Broadband information included with your computer. For
additional information, go to the HP website at
regions/countries only).

Inserting and removing a SIM

CAUTION:
To insert a SIM, follow these steps:
1. Shut down the computer.
2. Close the display.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface, with the battery bay toward you.
6. Remove the service door (see
7. Remove the battery (see
8. Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.
NOTE:
inserted into your computer.
section in this chapter.
To prevent damage to the connectors, use minimal force when inserting a SIM.
Removing a battery on page
See the image on the battery bay to determine which way the SIM card should be
http://www.hp.com/go/mobilebroadband
Removing the service door on page
Inserting and removing a SIM
52).
42).
Connecting to a wireless network
(select
19