Viewing Your Wi-Fi Direct Network Configuration; Changing Wi-Fi Direct Settings - Kodak HERO 4.2 Extended User Manual

Networking Your Printer

Viewing your Wi-Fi Direct Network Configuration

Changing Wi-Fi Direct Settings

20
1. Press .
2. Touch , then touch Network Settings .
3. Touch , then touch Manage Wi-Fi Direct .
4. Touch View Wi-Fi Direct Configuration . The Wi-Fi Direct settings appear on the
LCD. To scroll and review the settings, touch
• Wi-Fi Direct Hotspot
• SSID
• Security String
• IP Address
• Subnet Mask
• Channel
• Region
• MAC address
• No. of devices connected
5. When you are done, touch OK .
Your printer is assigned a network name (SSID), security string, and IP Address. You
can change these settings, but you must reconnect your device to your printer after
you make changes.
1. Press .
2. Touch , then touch Network Settings .
3. Touch , then touch Manage Wi-Fi Direct .
4. Touch Advanced Wi-Fi Direct Settings .
5. Touch Yes .
6. Touch the setting you want to change: SSID , Security String , or IP Address .
7. Enter a new value, then touch OK to return to the Advanced Wi-Fi Direct
Settings.
8. Reconnect your device or computer to your printer; use your new settings.
www.kodak.com/go/aiosupport
.