Settings Menu - Focusrite Liquid Saffire 56 User Manual

Sample rate display
This displays the current Sample rate at which the Liquid Saffire 56 is running. To change the Sample rate, click on the red sample
rate value and select 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz.
Note: it is advisable to quit your DAW application BEFORE you make sample rate changes to prevent any undesirable side-effects
in your DAW!
Sync Source display
Displays the currently selected sync source (red display) – To change the sync source, click on the red sync source value and select
SPDIF, SPDF -OPT, ADAT1, ADAT 2, Word Clock, or Internal.
Sync source locked display
Displays "Locked" when the Liquid Saffire 56 has successfully locked to the specified Sync Source.
If "No Lock" is seen, then the unit has been unable to lock to either an external ADAT or S/PDIF signal. If this is the case, then
please check that digital cables are secure in their input sockets, and that the external digital devices have been set up as
master devices.
Firewire Driver
This should display "Connected" at all times when the Liquid Saffire 56 is connected to the computer via Firewire. If this shows
"Disconnected" please check Firewire connections, check that the unit is switched on etc. If it still shows "Disconnected" then
restart the computer and then re-start the Liquid Saffire 56.
Unit Name Text Field
Allows naming of the Liquid Saffire 56 unit. Double click in the field and enter your text. Press enter (return) on your computer
keyboard to complete.

Settings Menu

This is a dropdown menu containing all of the following items which allow you to set up different global/system configurations.
This is the only part of Saffire MixControl software where there are differences between the Windows and Mac versions.
Mac Windows
25