Ecothrottle System; Ecothrottle Switch Tm - Honda EU 1000i Owner's Manual

ECOTHROTTLE SYSTEM

With the switch in the ON position, engine speed is automatically
lowered when loads are reduced, turned OFF or disconnected. When
appliances are turned ON or reconnected, the engine returns to the
proper speed to power the electrical load. In the OFF position, the
TM
EcoThrottle system does not operate.
Appliances with large start-up power demands may not allow the
engine to reach normal operating rpm when they are connected to the
generator. Turn the EcoThrottle
appliance to the generator. If the engine still will not reach normal
operating speed, check that the appliance does not exceed the rated
load capacity of the generator.
If high electrical loads are connected simultaneously, turn the
TM
EcoThrottle switch to the OFF position to reduce voltage changes.
The EcoThrottle
require only momentary power. If the tool or appliance will be turned
ON and OFF quickly, the EcoThrottle
position.
When using the DC output, turn the EcoThrottle
position.
TM
TM
system is not effective for use with appliances that
ECOTHROTTLE SWITCH
TM
to the OFF position and connect the
TM
switch should be in the OFF
TM
O O F F F F
O O N N
TM
switch to the OFF
25