Table of Contents
Advertisement
Reinstall the wind cover.
Tighten 5 screws on the
cabinet
Install the batteries in the battery case, and fill the Cartridge tank with clean, pure kerosene. Set the tank into the
heater and wait at least 60 minutes for the new wick to fully saturate with kerosene.
Remove the wick adjusting knob
once again, if it was reinstalled
before.
Step 22
Reinstall the chimney and the
cartridge tank.
Step 25
Step 23
Step 26
12
Reinstall the cabinet.
Reinstall the wick adjusting
knob. Close the front grille.
Step 24
Step 27
Hide quick links:
Advertisement
Table of Contents
