System Setting / Monitor / Default Setting / Auto Detect Optimal Setting - BOXLIGHT ProjectoWrite2 User Manual

Registering And Configuring The Projector
System Setting
Monitor
Item
Lamp Timer
Air Filter Alert
System Status/
Tempeture Level
Input Source
Default Setting
Item
Lamp Timer Alert (Hr.)
Filter Timer Alert (Hr.)
Auto Detect Timer
(minutes)
Auto Detect Optimal Setting
Projector Number (Sets) Timer Interval (Minutes)
1~25
26~50
51~100
101~255
Description
Lamp timer from projector.
Air Filter Timer from projector.
System Status and Tempeture. Level from projector in Power On
status.
Input Source from projector in Power On status.
Description
Default Setting Includes 1000/1500/2000 Hours.
When Lamp Timer reach alert target, window will show lamp timer
in red color to remind user to replace the lamp.
Default setting includes 300/500/800/1000/1500 Hours. When Filter
Timer reach alert target, window will show filter timer in red color to
remind user to replace the filter.
Auto Detect setting. Default setting includes 1/3/5/10 minutes; user
can set the optimal default listed in Table 4.
1/3/5/10
3/5/10
5/10
10>
47
< Table 2 >
< Table 3 >
* The maximum quantity of
projector monitored is 255.
< Table 4 >