Modify The Projector Setting - BOXLIGHT ProjectoWrite2 User Manual

Before Use

Modify The Projector Setting

If modifying the registered projector setting is needed, please move your cursor to
the data table and click the item that you would like to modify, the detail will be
shown on the right side table.
< Graph 5 > : Register Table.
After setting, you can save the data by clicking
button.
Item
Show the Host name
Display name
(16 characters at most in ASCII)
IP Address Show the IP Address
Mask Show the Mask
Gateway Show the Gateway
Show up the MAC code
MAC
(The default value can not be modified)
Capture IP address from network sensor
DHCP
automatically.
< Table 1 > : Setting Windows
button or cancel by clicking
Description
43