Remote Control - BOXLIGHT ProjectoWrite2 User Manual

Remote Control

Remote Control
Remote Control Battery Installation
1. Remove the battery cover.
2. Load the batteries. Make sure the plus
pole is correctly oriented.
3. Close the battery cover.
Caution
► Avoid excessive heat and humidity.
►Do not drop the remote control.
► Do not expose the remote control to water or moisture, this could result in malfunction.
► If the remote control will not be used for an extended period, remove the battery.
► Replace the battery when remote control operation becomes sluggish or unresponsive.
► Do not place the remote control close to the cooling fan of the projector.
► Do not use batteries of different types at the same time.
► Do not mix a new battery with used one. Make sure the plus and terminals are correctly
aligned when loading a battery.
► Dispose of batteries in accordance with environmental laws.
► Do not disassemble the remote control. If the remote control needs service, please contact
16