Advertisement
PREPARATION
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. and turn on the
power switch in the rear of the unit. Only operate heater in upright position with caster wheels attached.
OPERATING INSTRUCTIONS
1、Start
2、Setting room temperature
Or
Or
3、Setting electro lock
Function of electro lock can avoid misoperation from children. Locking can be set in both power-on and
power-off modes.
And
And
Turn the heater on by pressing the ON/OFF button on the
control panel
Adjust the thermostat by pressing the arrows on the control
panel or remote control.
Set temperature indication varies from 86℉ to 59℉，or
from 30℃ to 15℃. Once you have chosen the desired
temperature, the heater will remain on until the room
temperature increases to the temperature on the digital
display. The heater will cycle on and off to maintain the
desired room temperature.
Press ℃/℉ button, then digital display will indicate
Fahrenheit value or Celsius value.
When Fahrenheit indicating light's on, digital display
indicates Fahrenheit value,
When Celsius indicating light's on, digital display
indicates Celsius value.
Press Temp Up and Temp Down buttons once for 3
seconds. Locking is fulfilled when a buzzer rings. When
locked, control panel and remote control failed to function.
When release is needed, please re-press Temp Up and
Temp Down buttons once for 3 seconds. Release is fulfilled
when a buzzer rings. Lock indication disappears. Control
panel and remote control return to function.
5
Advertisement
