Do you have a question about the LS‐Stealth‐6 and is the answer not in the manual?
Questions and answers
Scott Campbell
February 2, 2025
Will no longer start. Was working just fine and then it stopped working. Is there some type of fuse that needs to be checked. I changed outlets and my fuse box and everything was fine. I unplugged for awhile and tried to plug back in and it still didn’t work.
1 comments:
Mr. Anderson
February 10, 2025
If the LifeSMART LS-Stealth-6 heater no longer starts after working fine, possible issues could include:
1. Electrical Connection Issues – Ensure the heater is plugged directly into a 120V 15-amp grounded outlet. Avoid using power strips, surge protectors, extension cords, or loose/broken receptacles.
2. Damaged Power Cord or Plug – If the power cord or plug is damaged, the heater should not be used.
3. Malfunction or Internal Damage – Signs of malfunction or internal component failure could prevent the heater from turning on.
4. Warranty Voided by Alteration – If the heater’s design or operation has been altered, it may no longer function and the warranty would be void.
5. Electrical Requirement Deficiencies – The heater requires a dedicated 15-20 amp outlet. If the circuit cannot supply the required power, the heater may not start.
If none of these apply, contacting LifeSMART Technical Support for further evaluation is recommended.
Page 1
Lifesmart Infrared Heater User’s Manual Model# LS‐Stealth‐6 FOR INDOOR USE ONLY 120VAC 15 AMP DEDICATED CIRCUIT The LIFESMART Infrared Heater works with your in‐home furnace to provide supplement heat. Carefully and thoroughly read this manual before using the LIFESMART Infrared Heater for the first time. We recommend keeping this manual for regular review and future reference. This heater is intended for residential use. ...
Infrared heat technology, in general, produces rays that are safe and highly beneficial to our bodies and health professionals have been using infrared technology for decades to treat muscle and joint pains. LifeSMART Infrared Heaters are constructed of a wood housing. They are equipped with nylon caster Contact LIFESMART PRODUCTS Technical Support wheels for easy mobility.
Disclaimers Heat Type: Quartz Infrared Heat LIFESMART shall not be liable for any loss due to use (or misuse) of the heater or other LIFESMART products or other incidental or consequential costs, expense or damages without irrefutable foundations. How It Works Under no circumstances shall LIFESMART or any of its representatives be held liable for injury to any person or damage to any property, however arising.
LIFESMART warranty department. The purchaser may also opt to ship the product to LIFESMART to have it repaired. The purchaser will be responsible to 1) Plug the power cord directly into a conventional 120V 15 amp outlet and press the MASTER prepay any shipping charges (both ways), export taxes, custom duties and taxes, or any other charges POWER switch on the rear of the portable heater.
2) By pressing the F/Down button, you can switch the temperature format from Fahrenheit to Troubleshooting Celsius and vice versa. 1. PROBLEM: a. If the Heat Emitter is broken or damaged Press the F/Down to b. If the Control Panel is not responding, the temperature reading is above 86 F/30 C, or there is a burning switch from Fahrenheit...
Page 6
Wrap the cord around the handle on 6) The lifeSMART Infrared Heater can be turned off by pressing the POWER button. DO NOT the rear of the portable heater. Cover the heater to prevent dust from accumulating on the heater. You may want to repack it back in its original carton.
Need help?
Do you have a question about the LS‐Stealth‐6 and is the answer not in the manual?
Questions and answers
Will no longer start. Was working just fine and then it stopped working. Is there some type of fuse that needs to be checked. I changed outlets and my fuse box and everything was fine. I unplugged for awhile and tried to plug back in and it still didn’t work.
If the LifeSMART LS-Stealth-6 heater no longer starts after working fine, possible issues could include:
1. Electrical Connection Issues – Ensure the heater is plugged directly into a 120V 15-amp grounded outlet. Avoid using power strips, surge protectors, extension cords, or loose/broken receptacles.
2. Damaged Power Cord or Plug – If the power cord or plug is damaged, the heater should not be used.
3. Malfunction or Internal Damage – Signs of malfunction or internal component failure could prevent the heater from turning on.
4. Warranty Voided by Alteration – If the heater’s design or operation has been altered, it may no longer function and the warranty would be void.
5. Electrical Requirement Deficiencies – The heater requires a dedicated 15-20 amp outlet. If the circuit cannot supply the required power, the heater may not start.
If none of these apply, contacting LifeSMART Technical Support for further evaluation is recommended.
This answer is automatically generated