Operating Instructions - lifeSMART PCHT1109US Manual

OPERATING INSTRUCTIONS

1 . Turn the heater on or off by pressing the Pow-
er button on the control panel (C) or by press-
ing the Power button on the remote control
(B) .
Once the power is off, heating elements
will stop working first . The fan will continue
working for up to 90 seconds to dispense
residual heat inside the heater . This is a
normal function .
2 . Select a heat setting by pressing the MODE
button on either the control panel (C) or the
remote control (B) to toggle between the two
heat settings .
Power for high is 1,500 W; low is 1,000 W .
Note: The HIGH LOW LED light will only illu-
minate when the unit is heating and the
heating elements are engaged .
3 . Set the temperature by pressing the arrows on
the control panel (C) or the remote control (B) .
You can set the temperature on the heater
anywhere between 50°F and 90°F . Once
you have chosen the desired temperature,
the heater will remain on until the room
temperature increases to the temperature
on the digital display . The heater will cycle
on and off to maintain the desired room
temperature .
Note: To engage the child lock press and hold
TEMP UP and TEMP DOWN button to-
gether for 5 seconds on the control pan-
el (C) . On the remote (B), long press the
child lock button for 5 seconds to engage
the child lock . Repeat the above steps to
disengage the child lock feature .
1
C
2
C
3
C
C
12
HIGH LOW
B
B
B
B