OWNERS INSTA LLATION AND OPERATING MANUAL LLATION AND OPERATING MANUAL OWNERS INSTA LIFESMART INFRARED HEATER Model : LS-1000X-6W S afety
N otice
Please read this entire Installation and Operating Manual BEFORE installing and using your new Infrared Heater. Failure to fully understand and follow instructions may result in property damage, bodily injury, or even death.
Describe the issue and symptoms you have for, and about the product. A certified LIFESMART Technical Support agent will give you an evaluation of your issue and your resolution options. If the answer is not available at that time, you will be referred to the appropriate channels, or given a call/e-mail back within 72 hours with an answer or resolution.
INTRODUCTION Thank you for choosing one of the best Infrared distribution heaters available on the market today. Our Infrared Heater is a very safe and effective room heater. It produces safe, clean and economical heat by utilizing quartz infrared heating elements. The heating process of the Infrared Heater is similar to the way the sun warms the earth.
SPECIFICATIONS Electrical: Voltage: 120V~60Hz Power consumption: Up to 1500 Watts Thermostat range: 50-90 Fahrenheit Dimensions: 14” x 12.7” x 17.6”, 25.5lbs SAFETY FEATURES Tip-Over Safety Feature This
h eater
i s
e quipped
w ith
a
t ip-‐over
s afety
f eature.
O nce
t he
h eater
i s
t ipped
o ver,
a n
i nternal
s witch
w ill
automatically
...
Page 6
IMPORTANT
S AFETY
I NSTRUCTIONS
READ
A ND
U NDERSTAND
A LL
I NSTRUCTIONS,
S AFETY
W ARNINGS,
AND
F AQ’s
B EFORE
U SING
T HE
H EATER ...
Page 7
9. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations, nor any locations that use GFCI outlets. 10. Never place heater where it may fall into a bathtub or other water receptacles. 11. Do not run cord under carpet. Do not cover cord with throw rugs, runners, or similar coverings.
Heating elements may be replaced by obtaining them from the Manufacturer. All parts may be purchased through LIFESMART if your product is out of warranty. Note: If you feel that the elements are definitely faulty right out of the box, contact the LIFESMART Technical Support department first (for troubleshooting and verification).They can then direct you on to the next step.
Page 9
Once
I
p lug
t he
u nit
i n
a nd
t urn
i t
o n,
h ow
l ong
w ill
i t
t ake
t o
h eat
m y
r oom?
The heating process in the heater begins immediately upon powering on, and setting the desired temperature above the ambient temperature.
Page 10
I
p urchased
m y
h eater
s o
t hat
i t
c ould
c ut
m y
h eating
c osts,
b ut
m y
e lectric
b ill
h as
g one
u p.
W hy?
The compact LIFESMART heater can definitely save you on heating costs, when compared to the existing central heating system in your home, and when used as supplemental heat.
Page 11
My
H eater’s
P ower
c ord
g ets
w arm.
M y
c ord
i s
s howing
s igns
o f
h eat
o r
m elting
a t
t he
o utlet.
I s
t his
n ormal?
A warm power cord is normal. All LIFESMART power cords are rated safe for up to 105° C/ 221° F by the UL, CSA, or ETL.
HEATER OPERATION Here is a small description of how our heaters work: Operation Mechanism: Air is brought into the heater through an easy to clean, washable filter at the rear of the unit. The highly efficient, one-speed, high volume fan pushes filtered air through the chamber, across the heat elements.
Doing so will exceed the maximum amperage allowed for that breaker. Excessive heat, hot power cords, damage to outlets, and risk of fire will be the result, if not adhered to, and will void your warranty (releasing LIFESMART from any liability). 13
...
USER’S GUIDE Plug your Infrared Heater power cord into a 120V, 15amp (or higher) three-prong receptacle. To Turn the Heater On: 1. Turn the Master toggle switch in the back of the heater to the “On/Lit” position. 2. Press the “Power” button on the front control panel or “ON/OFF” button on the remote control.
Page 15
Heating Process: In the High Mode, all heating elements will engage for full 1500 Watt heating capacity. In the Low mode, corresponding heating elements will engage to heat at 1000 Watts, to save energy. This mode can be used when some heat is needed, but not at full capacity. In the Eco mode, the heater’s Set Desired Temperature will automatically default to 68°F.
FILTER MAINTENANCE Your Infrared Heater is equipped with an easy to clean, washable static filter. Regular cleaning and maintenance of your filter will ensure a lifetime of trouble-free use. 1. Turn off the heater. Locate the filter at the rear of the heater and lift out (some filters may be held on by brackets.
Legal Remedies This limited warranty gives the original purchaser specific legal rights. Other rights may vary from state to state. LS-‐1000X-‐6W
R EV1
P RINTED
I N
C HINA
19
...