Deleting Records - Mircom Autodialer ADC Series User Manual

Programming The Autodialer ADC

Deleting Records

To delete a record, you must be in programming mode. Refer to Entering Programming Mode on
page 2 for instructions.
Step 1: Select "To Edit Resident Codes"
To Edit Resident
Codes - Press #
Step 2: Select and delete the record
Code To Review
X X X X
Code Telephone
X X X X X X X-X X X X
• To delete another record follow step 2 again.
• To exit, press
8
1. Press
you find "To Edit Resident Codes".
2. Press
1. Enter the dial code for the record you want to
delete. The display will now show that record.
Note: Scroll up or down to view other records.
2. Press
shows the message "End of List" to indicate that the
record was successfully deleted before returning to
the records list.
to return to the programming menu.
3
to scroll down or
to select.
to delete the record. The display briefly
to scroll up until