Programming A Tv/Vcr Combo; Searching For Your Code - Radio Shack 8-IN-ONE REMOTE Owner's Manual

PROGRAMMING A TV/VCR COMBO

1. Find the codes for the devices you want to program in Setup
Codes for TV/VCR Combos on page 51 and write them down
or highlight them.
2. Turn on the TV/VCR Combo and insert a videocassette.
3. On the remote, press and hold P until the display changes
from the default device and time to [CODE SET].
NOTE: Default values for device, its code, and time are shown
above.Your remote control settings may be different.
NOTE: If you wish to exit the programming mode at any time, press
EXIT once. An [EXIT] message appears as the remote control returns
to normal operation.
NOTE: If an [INVALID] message appears, you have inadvertently
pressed an incorrect key. Simply note your error and continue
programming.
4. Press SELECT once to begin programming. The last-selected
device and its current code (e.g., TV and 0051) appear.
5. Press VCR once. [VCR] and its current code appear.
6. Use the keypad to enter the first four-digit code for your
device and press SELECT once.
For example, to enter the first Sony TV/VCR Combo on
page 51, press 0 four times and then SELECT once.
If the code is entered correctly, [SUCCESS] appears.
7. Press EXIT to exit the programming mode.An [EXIT SETUP]
message appears as the remote returns to normal operation.
8. To verify the code works, aim the remote at the TV/VCR
Combo, press VCR once and then press POWER once.
NOTE: If the device does not have a POWER key, press
The unit should turn off or start playing if you pressed
(Play). If it does not respond, repeat steps 3 through 9,
trying each code for your brand until you find one that works.
10 Programming A TV/VCR Combo/Searching For Your Code
8- -O R
IN NE EMOTE
(Play) .
If you cannot find a code that works, try Searching For Your
Code in the next section.
9. For future reference, write down the working TV/VCR
combo code in the below boxes:
TV/VCR Code:
TV Code (if used):

SEARCHING FOR YOUR CODE

If your device does not respond to the remote after trying all codes listed for
your brand, or if your brand is not listed at all, try manually searching for
your code.
For example, to manually search for a code for your TV:
1. Turn on the TV.
On the remote, press and hold P until the display changes
2.
from the default device and time to [CODE SET] .
NOTE: Default values for device, its code, and time are shown
above.Your remote control settings may be different.
NOTE: If you wish to exit the programming mode at any time, press
EXIT once. An [EXIT] message appears as the remote control returns
to normal operation.
NOTE: If an [INVALID] message appears, you have inadvertently
pressed an incorrect key. Simply note your error and continue
programming.
M
3. Press once. [MAN SRCH] appears.
NOTE: If you go past [MAN SRCH], press
return to it.
4. Press SELECT once to begin programming. The last-selected
device and its code (e.g., VCR and 0035) appear.
5. Press TV once. The desired device and the first code in the
manual search list (e.g., TV and 0047) appear.
6. Aim the remote at the TV and press SELECT once. The red
LED blinks and the
are being transmitted.
L
one or more times to
(IR) icon flashes, indicating IR codes