Honda EB11000 Owner's Manual page 21

6. Press the GFCl RESET button. The RESET button should stay in,
flush with its base plate.
With the RESET button in and engine running, turn the circuit
breaker to the ON position. The circuit breaker should remain in the
ON position. The circuit breaker will not remain in the ON position if
the RESET button is extended.
If the GFCl and circuit breaker do not function as described, take the
generator to an authorized Honda generator dealer for repair.
GFCl RESET BUlTON CIRCUIT BREAKER
During generator use, if the GFCl RESET button extends and the circuit
breaker trips, this usually indicates a faulty power tool, appliance, or
load.
If that occurs, perform test steps 1 through 6 to verify that the GFCl
and circuit breaker are in proper working order. If the GFCl and circuit
breaker test correctly, then you will know that the fault is in the powe
tool, appliance, or cord. Repair or replace the faulty power tool,
appliance, or cord before further use.
19