palmOne Zire 31 User Manual page 91

CHAPTER 5
Tip
You can continue to use
the HotSync cable even if
your computer is set up
for IR synchronization. If
you disconnect the cable
after selecting Infrared on
a Windows computer, be
sure to click the HotSync
Manager icon and select
Local USB before
reconnecting the cable.
Zire™ 31 Handheld
Synchronizing Your Handheld with Your Computer
2
Synchronize your handheld with
your computer:
a. Go to the Home
select HotSync
b. Tap Local.
c. Tap the pick list below the
HotSync icon and select IR to
a PC/Handheld.
d. Position the IR port of your
handheld within a few inches of the IR port of your computer.
e. Tap the HotSync icon
f. When synchronization is complete, a message appears at the top of your
handheld screen. Be patient; synchronization may take up to a few minutes.
Done
screen and
.
Tap pick list
on your handheld.
HotSync icon
75