Indicators and Projector Condition
Check the indicators for the projector condition.
The projector is operating normally.
Indicators
WARNING
POWER
LAMP
TEMP .
green
red
✽
Fig.1 Filter replacement icon and "Please wait... "
• • • on
• • • dim
• • • off
L2K1000 User Manual
020-000393-01 Rev.1 (04-2011)
WARNING
SHUTTER
FILTER
blue
red
orange
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
• • • blinking at the normal rate
(approx. 1 second ON,
1 second OFF)
• • •blinking fast
(approx. 0.5 seconds ON,
0.5 seconds OFF)
Projector Condition
LAMP 1/2
REP .
orange
The projector is off. (The main On/Off switch is OFF
position or the AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/
✽
STAND-BY button to turn on the projector.
The projector is operating normally.
✽
(The Shutter is open)
The projector is operating normally.
✽
(The Shutter is closed)
The projector is preparing for stand-by or the
projection lamp is being cooled down. The projector
✽
cannot be turned on until cooling is completed and
the POWER indicator lights green.
The projection lamp is being cooled down in the
✽
Power management mode.
✽
The projector is in the Power management mode.
The projection lamp is being cooled down in the
✽
Shutter management mode.
The projector is in the Shutter management mode.
Press the ON/STAND-BY button to turn on the
✽
projector.
The filter is scrolled using the FILTER button on
✽
the remote control or the Filter control function in
the setting menu. When the filter is being scrolled,
the Filter replacement icon and "Please wait... "
message (Fig. 1) appear on the screen.
• • • blinking slow
• • • Differs according to conditions.
✽
Appendix
(approx. 2 seconds ON,
2 seconds OFF)
85