Christie L2K1000 User Manual page 53

Video Input
Noise reduction
Noise interference on the screen can be reduced. Press the
Point buttons to change the noise reduction mode.
7 8
Off ......... Noise reduction mode is Off.
On .......... Noise reduction mode is On.
Progressive
An interlaced video signal can be displayed in progressive
mode. Press the Point 7 8
progressive scan mode.
Off ......... Progressive scan mode is Off.
On .......... Progressive scan mode is On.
Film ........ For watching a film. With this function, the
projector reproduces pictures faithful to the
original film quality.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
Yes. All adjustments will return to their previous figures.
Store
To store the adjusted data, select Store and press the
or the SELECT button. Use the Point ed buttons
Point
8
to select one from Images 1 to 10 and press the SELECT
button.
A confirmation box appears and then select Yes. Stored data
can be called up by selecting an Image (1-10) in the Image
Mode Selection on page 47 .
Note
✔
• Progressive cannot be selected when 480p, 575p, 720p, or
1080p is selected (p.46).
• Noise reduction cannot be selected with the computer input
and when the video signal format is 1080p. (p.46).
50
buttons to change the
A confirmation box appears and then
select Yes.
L2K1000 User Manual
020-000393-01 Rev.1 (04-2011)