Table of Contents
Advertisement
OPERATION
CONNECTING
THE BAGGER CART
Park the tractor on a flat, level surface. Set the parking
brake and remove the ignition key to prevent accidental
CLEVIS PI
starting. The following instructions
are for the HA411 8
and HA4120 tractors only. Refer to the hitch kit
installation instructions
for other tractor models.
1, Lift the bagger cart frame towards therear hitch.
Install the two clevis pins and spring clips as shown.
SPRING CLIP (2)
'
\
2. HA4120 with the 48" Deck: Lift
the middle chute and install it on
the lower chute on the side
blower. Connect the rubber strap
to the tension release lever.
3. HA4118 with the 38" Deck: Lift the discharge guard, and install the lower chute onto the rear edge of
the mower deck first, then turn the chute toward the front. Install the connector bracket and clip onto the
mower deck. Slide the middle chute onto the lower chute, then connect the S-hook on the rubber strap
to the eyelet on the lower chute.
INSERT BACK EDGE OF CHUTE FIRST
CONNECTOR
BRACKET
CLIP
LOWER CHUTE
\
./
TURN TO FRONT
EYEiET
6
BClOOO BAGGER CART
Advertisement
Table of Contents
