Table of Contents
Advertisement
MAINTENANCE
MAINTENANCE
SCHEDULE
Use the following maintenance
schedule and the maintenance schedule shown in the tractor owner's
manual.
ITEM
Cover assembly
Inspect
Tires
Wheels
ACTION
Check pressure
Lubricate
INTERVAL
I
Before each use
Every 25 hours
Notes
I
0
NLGI #2
grease
Cover Assembly
l
Check the condition of the cover before each use. If the cover is torn, worn or otherwise damaged,
replace it before using the bagger cart.
l
Make sure the cover is not clogged with dirt or debris. The cover must be able to vent air for the best
possible performance.
Dirt and debris can also cause mold and rot which will cause premature wear of
the cover fabric.
l
Clean the cover with a standard garden hose. Pull out the dump cloth, and wash it at the same time.
Allow the cover and dump cloth to fully dry before use. A wet cover or dump cloth will clog quickly and
promote mold and rot.
l
The cover is subject to deterioration
and wear under normal use and it will eventually need to be
replaced. Replace the cover with a genuine Honda bagger cart cover or equivalent. The cover must meet
ANSI Standard 871 .l .
Tires
l
Check the tire air pressure before each use.
TIRE AIR PRESSURE:
30 psi (207 kPa).
Wheels
l
Lubricate the wheels every 25 hours of use. There are grease fittings on each axle and swivel. One or
two pumps of grease is usually sufficient.
WHEEL AND SWIVEL GREASE: NLGI #2 GENERAL PURPOSE GREASE
12
BCIOOO BAGbiER CART
Advertisement
Table of Contents
