Advertisement
1/2"
3/8"
Step 3:
3.1:
Note: The Backboard Brackets may look different than
Bend the Backboard Brackets (LB & RB) out.
Use a 3/8" socket wrench to attach the Screws (HK) through the
3.2:
top holes in the Backboard Brackets and into the Backboard.
Completely
tighten all Rim
hardware.
Hardware Bag: 1028024
HK
(2)
the ones shown below.
RB
LB
HK
HK
Do not overtighten the
Screws. Only tighten them
a half turn after the head
of the Screw contacts the
Brackets.
NOTE: FROM THIS POINT ON
FOLLOW THE INSTRUCTIONS
PROVIDED WITH THE POLE OR
MOUNTINg UNIT.
Meijer.com
Advertisement
