Download Print this page

Lifetime 90025 Owner's Manual

Backboard and rim combo

Advertisement

Quick Links

Meijer.com

Advertisement

loading

Summary of Contents for Lifetime 90025

  • Page 1 Meijer.com...
  • Page 2: Assembly Instructions

    Meijer.com LIFETIME BACKBOARD AND RIM COMBO MODEL #90025 ASSEMBLY INSTRUCTIONS AND OWNER’S MANUAL WARNING To ensure your safety, do not attempt to assemble this system without reading and following all instructions carefully. Identify and inventory the parts using the Parts List. Failure...
  • Page 3 Lifetime’s Promise to You: Maintaining your privacy is our longstanding policy at Lifetime. And you can rest assured that Lifetime will not sell or provide your personal data to other third parties, or allow them to use your personal data for their own purposes.
  • Page 4: Parts List

    Meijer.com PARTS LIST Part # Description DD00200 1036330 Backboard AM01500 Rim Support Bracket 825608 BS00800 5/16” x 1” Screw Hardware (1028024) 300027 5/16” x 1 3/4” Hex Bolt BB01400 U-Bolt 302014 5/16” Flat Washer 302090 5/16” Nylock Flange Nut HARDWARE IS ACTUAL SIZE (Unless otherwise indicated) (Not actual size) Tools and Materials...
  • Page 5: Safety Instructions

    Meijer.com 1. The Backboard can be mounted to any Lifetime Products ® brand pole or most other commercially available poles. If using other than a Lifetime Products pole, the ® Mounting Bracket design must provide adequate support behind the Rim mounting holes as well as behind the upper Backboard mounting holes.
  • Page 6 Meijer.com ATTENTION: This Backboard is not designed for custom installations. The Backboard is designed for use with a Lifetime Products Pole Mounting Unit or Universal Mounting Bracket. If you ® are using a Pole or Mounting Bracket, mount the Backboard and Rim using the hardware and instructions included with the Pole system or Mounting kit.
  • Page 7 Meijer.com You need to have Backboard Brackets that look like the ones in the picture below and use the U-Bolt provided with this Combo. 1.1: Backboard Brackets U-Bolt Notch Notch...
  • Page 8 Meijer.com Hardware Bag: 1028024 1/2” **Two Adults Required for This Step** Step 2: 2.1: Only finger tighten the Nuts (HH) now. Note: If you have purchased this combo unit to be attached to a pole-only unit, refer to the pole-only unit for instructions on how to assemble and attach the combo unit to the pole.
  • Page 9 Hardware Bag: 1028024 1/2” Meijer.com 3/8” Step 3: 3.1: Note: The Backboard Brackets may look different than the ones shown below. Bend the Backboard Brackets (LB & RB) out. Use a 3/8” socket wrench to attach the Screws (HK) through the 3.2: top holes in the Backboard Brackets and into the Backboard.
  • Page 10 ROOF MOUNT, WALL MOUNT, EXISTING POLE MOUNT If mounting the Backboard to a roof mount, wall mount or existing pole mount that does not have an extension provided, you must use a Mounting Bracket Kit designed for this purpose. Lifetime Products, Inc. offers a ®...
  • Page 11 9594 Intermediate Size Basketball 594201 To place orders, use a Master Card or Visa and call our Customer Service Department or send check or money order to: LIFETIME PRODUCTS, INC. P.O. BOX 160010 BLDG. D-11, FREEPORT CENTER CLEARFIELD, UT 84016-0010...
  • Page 12 If the equipment is defective within the terms of this warranty, Lifetime Products, Inc. will repair or replace defective parts at no cost to the purchaser. Shipping charges to and from the factory are not covered and are the responsibility of the purchaser.