Table of Contents
Advertisement
Appendix C. Status Buffer Messages
PROTOCOL_ERROR
Call control error.
PUMPIO: dpump-quit
Rate adaption stopped due to DTE error.
Rcv Cause XXX
Undefined cause message received.
REQ_CHANNEL_NOT_AVAIL
The channel type requested is currently not available.
Remote not ISU
Bonding negotiation determined the far-end unit is not another ISU
product.
RESOURCE_UNAVAIL
The requested resource is unavailable.
RESP_TO_STAT_ENQ
Response to status enquiry.
Restarting Rate
Unit restarts DTE rate.
Retrieve
Voice call is retrieved from a holding state.
Ring
An incoming call on either the first or second channel (third channel if
call waiting) entered the Ring state. The calling phone number is dis-
played if available.
61200239L1-20
Express 3010/3110 User Manual
C-11
Advertisement
Table of Contents
