Table of Contents
Advertisement
Chapter 3. Application Configuration
CONFIGURING THE EXPRESS USING PRO-
FILES (QUICK SETUP)
To configure the DTE Options quickly and easily, use the Profiles
menu to automatically set up the most common DTE configurations.
Press the number corresponding to Profiles and press
the Profiles options:
Default
Dial 56k Sync
Dial 64k Sync
Dial 112k Sync
Dial 128k Sync
Leased 128k (Express 3010 only)
Ldm 128 Master (Express 3010
only)
For fine-tuning a particular application and DTE settings, see the sec-
tion Options for both Leased and Switched ISDN Service on page 3-8. This
section provides detailed step-by-step processes for configuring the
DTE Options.
Most Internet service providers supporting ISDN also support PPP
protocol. If connecting to an Internet service provider using one B-
channel, select Internet 64K, which sets the protocol to PPP. If ar-
rangements have been made with the Internet service provider to use
two B-channels, select Internet 128K, which uses multilink PPP proto-
col.
Loading a factory profile has no effect on any SPID(s), ISDN Phone
Number(s), or Switch Type settings already configured. The settings
that are altered when applying a profile are shown on the following
pages.
3-14
Express 3010/3110 User Manual
to display
Enter
Dial V120 asyn
Dial Bond asyn
Internet 64k
Internet 128k
Remote 64k
Remote 128k
Leased V.120 (Express
3010 only)
61200239L1-20
Advertisement
Table of Contents
