Table of Contents
Advertisement
Changing a String S-Register
Type
followed by the number of the S-register to be changed,
ATSS,
followed by an equal sign, followed by the numeric value to be as-
signed to the register, and press
ATSS80=5551212
Dialing a Call using the AT Command Processor
To dial a call using the DTE terminal and AT commands, type
, or
and the telephone number on one line; then press
DT
ATDP
ATD5551212
To end an active call with the AT command processor, press the break
in key sequence +++ or the redefined key; then type ATH and press
Enter to hang up the line.
Command
A
Answer. Places the Express in answer mode.
AT!S
Displays Status Buffer.
AT!S1
Displays Link Status
AT!V
Configuration Menu
D
Dial. Precedes the telephone access number
[ATD5551212].
DS
Dial a stored number [DS3].
H
Hang up. Disconnects the current call.
I0
Identify unit. Commands the unit to display model
number.
I1
Identify software. Commands the unit to display
software version.
O
On-line. Commands the unit to go back on line
61200239L1-20
Express 3010/3110 User Manual
Appendix A. AT Commands and S-Registers
.
Enter
Function
,
ATD
AT-
.
Enter
A-3
Advertisement
Table of Contents
